Tap Repairs and Installation in Newcastle: When to Call a Plumber

A dripping tap is easy to ignore. It’s annoying, but it doesn’t feel urgent. The problem is, a tap that drips once per second wastes around 10,000 litres of water per year — and in Newcastle, that goes straight onto your water bill. Beyond the waste, ignoring a dripping tap often means it worsens over time, eventually requiring a more expensive repair. Plumbing Bros fixes taps across Newcastle quickly, with a fixed-price quote before we start.

Common tap problems in Newcastle homes

• Dripping taps — usually caused by worn tap washers or O-rings in older-style taps, or worn ceramic cartridges in modern mixer taps
• Stiff or hard-to-turn taps — mineral scale buildup, particularly in Newcastle homes with hard mains water, causes tap mechanisms to seize over time
• Taps that spray in multiple directions — a blocked or damaged aerator on the spout tip is usually the cause and takes 5 minutes to fix
• No hot or no cold water from a mixer — usually a failure of the internal cartridge or a supply-side issue
• Leaking at the base of the tap — a worn O-ring in the tap body; this one can cause water damage to your vanity or sink cabinet if not addressed

New tapware installation in Newcastle

If you’re renovating your Newcastle bathroom or kitchen, new tapware is one of the highest-impact changes you can make for the cost. We install all styles and brands of tapware across Newcastle — from basic chrome mixers to premium designer tapware in bathroom renovations. We can advise on water pressure compatibility before you purchase (some premium tapware requires minimum 200kPa dynamic pressure).

How much do tap repairs cost in Newcastle?

• Tap washer replacement: $80–$160
• Ceramic cartridge replacement: $100–$220
• Full tap replacement (your tap): $120–$220
• Supply and install new tap: $180–$400 depending on tapware

FAQs about tap repairs in Newcastle

Can I replace a tap washer myself?

Replacing a tap washer in NSW is technically DIY-allowed for basic repairs, but if the tap is connected to hot water or the work requires turning off the main water supply and there is any other work involved, a licensed plumber is required. When in doubt, call us — a washer replacement is one of the quickest jobs we do.

My tap drips from the spout when the water is off – what’s wrong?

A drip from the spout when the tap is off indicates a worn tap washer (in a traditional tap) or a worn ceramic cartridge (in a modern mixer). Both are simple repairs.

Do you install tapware in commercial kitchens in Newcastle?

Yes. Commercial kitchen tapware installation involves specific flow rate and hygiene requirements. Our team installs commercial tapware in Newcastle restaurants, cafes, and commercial kitchens.