Pure-Tech Twin Under Sink Filter System
• Sediment, dirt, rust and other particles filtered down to 0.5 micron
• Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology.
• Has a stand-alone filter tap
To supply and install = $650+GST
EXTRAS
• Should your system require a pressure reduction valve add an extra = $80+GST
• Should a flexible hose connector be required add an extra =$15+GST (each)
• Drilling through stainless sink or timber benchtop only.
Pure-Tech Single In-Line Water Filter
• Sediment, dirt, rust and other particles filtered down to 0.5 micron
• Taste, odour, chlorine and other chemicals are absorbed by the carbon block technology.
• No need for a stand-alone tap, filtered through the mixer tap
To supply and install = $380+GST
EXTRAS
• Should your system require a pressure reduction valve add = $80+GST
• Should a flexible hose connector be required add an extra =$15+GST
Dura In-Line Water Filter
• Sediment, dirt, rust and other particles filtered down to 0.5 micron
• No need for stand-alone tap, filtered through the mixer tap
To supply and install = $275+GST
EXTRAS
• Should your system require a pressure reduction valve add an extra = $80+GST
• Includes 2 x flexible hoses
Stefani Twin Under Sink System
• 5-micron sediment pre filter removes dirt particles & sediment with the sediment filter
• 5-micron carbon filter absorbs chlorine and odours and refines the taste of your water
To supply and install = $299+GST
EXTRAS
• Should your system require a pressure reduction valve add an extra = $80+GST
• Should a flexible hose connector be required add an extra =$15+GST (each)
• Drilling through stainless sink or timber benchtop only.
Back-Wash Inline Whole House Filter
• Removes all sediment and debris from the water line which enters your houses mains
• Removes various chemicals from water line
• Lessens the hardness of the water system, this in turn would leave very scummy glass shower screens and white scale on tiles
• There is no need to install a kitchen filter as the water is already filtered
• There is no need to change the filter on the system, just a simple backwash which flushes and cleans the filter.
To supply and install = $750+GST
EXTRAS
• Should your meter not be in an easily accessible location – i.e pavers or concrete, this will be quoted as extra.
